Technical Configuration | MultiVOIP User Guide |
|
|
Voice/Fax Parameter Definitions (cont’d) )
Field Name | Values | Description |
Dynamic | Jitter |
|
Dynamic |
| Dynamic Jitter defines a minimum |
Jitter Buffer |
| and a maximum jitter value for |
|
| voice communications. When |
|
| receiving voice packets from a |
|
| remote MultiVOIP, varying delays |
|
| between packets may occur due to |
|
| network traffic problems. This is |
|
| called Jitter. To compensate, the |
|
| MultiVOIP uses a Dynamic Jitter |
|
| Buffer. The Jitter Buffer enables the |
|
| MultiVOIP to wait for delayed |
|
| voice packets by automatically |
|
| adjusting the length of the Jitter |
|
| Buffer between configurable |
|
| minimum and maximum values. |
|
| An Optimization Factor adjustment |
|
| controls how quickly the length of |
|
| the Jitter Buffer is increased when |
|
| jitter increases on the network. The |
|
| length of the jitter buffer directly |
|
| effects the voice delay between |
|
| MultiVOIP gateways. |
|
|
|
Minimum | 60 to 400 | The minimum dynamic jitter buffer |
Jitter Value | ms | of 60 milliseconds is the minimum |
|
| delay that would be acceptable over |
|
| a low jitter network. |
|
| Default = 150 msec |
86
