Multi-Tech Systems E1 Party, Busy Party, and Connected, Its Statistics Call Progress screen, 149

MultiVOIP User Guide			Technical Configuration
	Supplementary Services Definitions (cont’d)
	Field Name	Values	Description
	Call Name		Enables CNI function. Call Name
	Identification		Identification is not the same as Caller
	Enable		ID. When enabled on a given voip
			unit currently being controlled by the
			MultiVOIP GUI (the ‘home voip’),
			Call Name Identification sends an
			identifier and status information to
			the administrator of the remote voip
			involved in the call. The feature
			operates on a channel-by-channel
			basis (each channel can have a
			separate identifier).
			If the home voip is originating the
			call, only the Calling Party field is
			applicable. If the home voip is
			receiving the call, then the Alerting
			Party, Busy Party, and Connected
			Party fields are the only applicable
			fields (and any or all of these could be
			enabled for a given voip channel). The
			status information confirms back to
			the originator that the callee (the
			home voip) is either busy, or ringing,
			or that the intended call has been
			completed and is currently connected.
			The identifier and status information
			are made available to the remote voip
			unit and appear in the Caller ID field
			of its Statistics – Call Progress screen.
			(This is how MultiVOIP units handle
			CNI messages; in other voip brands,
			H.450 may be implemented
			differently and then the message
			presentation may vary.)

149