Operation and Maintenance | MultiVOIP User Guide |
|
|
MultiVOIP Program Menu (cont’d)
Menu Selection | Description |
|
|
Download CAS Protocol | The CAS protocol code allows the VOIP to |
| interact properly with the PBX or central- |
| office switch that it serves. The need to |
| download CAS protocols arises for only a |
| small minority of VOIP users, and only |
| when PBX/switch is found to be |
| incompatible with standard protocols. |
|
|
Download Factory Defaults | Select this to return the configuration |
| parameters to the original factory |
| values. |
Download Firmware | Select this to download new versions |
| of firmware as enhancements become |
| available. |
Download User Defaults | To be used after a full set of parameter |
| values, values specified by the user, |
| have been saved (using Save Setup). |
| This command loads the saved user |
| defaults into the MultiVOIP. |
Set Password | Select this to create a password for |
| access to the MultiVOIP software |
| programs (Program group commands, |
| Windows GUI, web browser GUI, & |
| FTP server). Only the FTP Server |
| function requires a password for access. |
| The FTP Server function also requires |
| that a username be established along |
| with the password. |
Uninstall | Select this to uninstall the MultiVOIP |
| software (most, but not all components |
| are removed from computer when this |
| command is invoked). |
Upgrade Software | Loads firmware (including H.323 |
| stack) and settings from the controller |
| PC to the MultiVOIP unit. User can |
| choose whether to load Factory |
| Default Settings or Current |
| Configuration settings. |