| MultiVOIP User Guide |
|
|
3.Using a Phillips driver, remove the three screws that secure the main circuit board and back panel assembly to the chassis.
NOTE:
Follow standard ESD precautions to protect the circuit board from static electricity damage.
back panel screws (3)
Figure C-3: Removing screws from back panel
4.Slide the main circuit board out of the chassis far enough to unplug the power connector.
power connector
Figure C-4: Accessing power connector
5.Unplug the power connector from the main circuit board.
6.Slide the main circuit board completely out of the chassis and place on a
7.Remove mounting hardware (2 screws, 2 nuts, and 4 standoffs) from its package.