Multi-Tech Systems MultiVOIPTM, E1 Snmp Parameter Definitions Field Name Values Description, 123

MultiVOIP User Guide Technical Configuration

The SNMP Parameter fields are described in the table below.

SNMP Parameter Definitions

Field Name	Values	Description
Enable SNMP	Y/N	Enables the SNMP code in the
Agent		firmware of the MultiVOIP. This
		must be enabled for the MultiVOIP
		to communicate with and be
		controllable by the
		MultiVoipManager software.
		Default: disabled
Trap Manager	Parameters
Address	4 places; n.n.n.n	IP address of MultiVoipManager
	n = 0-255	PC.
Community	--	A “community” is a group of VOIP
Name		endpoints that can communicate
		with each other. Often “public” is
		used to designate a grouping where
		all end users have access to entire
		VOIP network. However, calling
		permissions can be configured to
		restrict access as needed.
Port Number	162	The default port number of the
		SNMP manager receiving the traps
		is the standard port 162.
Community	Length = 19	First community grouping.
Name 1	characters (max.)
	Case sensitive.
Permissions	Read-Only,	If this community needs to change
	Read/Write	MultiVOIP settings, select
		Read/Write. Otherwise, select
		Read-Only to view settings.
Community	Length = 19	Second community grouping
Name 2	characters (max.)
	Case sensitive.
Permissions	Read-Only,	If this community needs to change
	Read/Write	MultiVOIP settings, select
		Read/Write. Otherwise, select
		Read-Only to view settings.

123