Multi-Tech Systems E1, MultiVOIPTM, MVP-2410, MVP-3010 manual 137, Matched

MultiVOIP User Guide				Technical Configuration
		“Custom Fields” Definitions (cont’d)
	Field	Description	Field		Description
	Bytes	Total bytes sent in	Bytes		Total bytes received
	Sent	call.	Received		in call.
	Packets	Packets lost in	Coder		Voice Coder
	Lost	call.			/Compression Rate
					used for call will be
					listed in log.
	Outbound	The DTMF dialing	Prefix		When selected, the
	Digits	digits received by	Matched		phonebook prefix
	Received
		this gateway from			matched in
		the remote			processing the call
		gateway			will be listed in log.
		presuming that
		DTMF is set to
		"Out of Band."
	Call	Successful or	Call Type		Indicates the Call
	Status	unsuccessful.			Signaling protocol
					used for the call
					(H.323, SIP, or SPP).
	Call	Indicates call’s	DTMF		Indicates whether the
	Direction	originating party.	Capability		DTMF dialing digits
					are carried "Inband"
					or "Out of Band." The
					corresponding field
					values differ for the 3
					different voip
					protocols.
					For H.323, this field
					can display "Out of
					Band" or "Inband".
					For SIP it can display
					either "Out of Band
					RFC2833" or "Out of
					Band SIP INFO" to
					indicate the out-of-
					band condition or
					"Inband" to indicate
					the in-band condition.
					For SPP it can
					display "Out of Band
					RFC2833" or
					"Inband".

137