Operation and Maintenance

MultiVOIP User Guide

 

 

5.After the PC gets a response from the MultiVOIP, the Dialog – IP Parameters screen will appear.

The user should verify that the correct IP parameter values are listed on the screen and revise them if necessary. Then click OK.

6.Progress bars will appear at the bottom of the screen during the data transfer.

The MultiVOIP’s “Boot” LED will turn off at the end of the transfer.

7. The Download Factory Defaults procedure is complete.

312

Page 312
Image 312
Multi-Tech Systems MultiVOIPTM, MVP-2410, MVP-3010, E1 manual 312