Multi-Tech Systems MultiVOIPTM, MVP-2410, MVP-3010 manual 105, General E1/E1/ISDN Parameters

MultiVOIP User Guide				Technical Configuration
		E1 Parameter Definitions (cont’d)
	Field Name		Values	Description
	General E1/E1/ISDN Parameters
	Line Build Out		0 dB, -7.5 dB,	To reduce the crosstalk on
			-15 dB, -22.5 dB	received signals, a transmit
				attenuator can be placed in the
				data path. Transmit attenuation
				is selectable. Default: O dB
	Pulse Shape		0 to 40 Meters	Refers to length of cable
	Level		40 to 81 m	between MultiVOIP and
			81 to 122 m	PBX/telco in meters. Most
			122 to 162 m	common will be 0 to 40m.
			162 to 200 m
	Caller ID Parameters
	Caller ID		Y/N	Turns Caller ID feature on (if
	Enable			checked) and off (if unchecked).
	Calling		0-9, *, #	A DTMF symbol used to mark the
	Number Prefix			beginning of the calling party
	(Caller ID)			number for use with Caller ID.
				Maximum length: 4 characters.
	Calling		0-9, *, #	A DTMF symbol used to mark
	Number Suffix			the end of the calling party
	(Caller ID)			number for use with Caller ID.
				Maximum length: 4 characters.
	Detect Flash		Y/N	This setting determines whether
	Hook			or not the MultiVOIP responds
				to hook-flash signals.
	Detection Time		100 – 1500	Minimum hook-flash time that
			milliseconds	will be interpreted as a valid
				flash by the MultiVOIP.
	Generation		100 – 1500	In some systems, a MultiVOIP
	Time		milliseconds	might receive a hook-flash signal
				from an upstream device (a PBX,
				voip or other device) and must
				replicate it to a downstream device.
				This parameter determines the
				duration of the hook-flash signal
				that is passed to a downstream
				device.
	Clocking		External/Internal	Set opposite to telco/PBX
				setting. Example: if telco
				clocking internal, set VOIP
				clocking as external.

105