Multi-Tech Systems E1, MultiVOIPTM, MVP-2410, MVP-3010 manual Inch Rack Enclosure Mounting Procedure

MultiVOIP User Guide Mechanical Installation & Cabling

19-Inch Rack Enclosure Mounting Procedure

Attaching the MultiVOIP to a rack-rail of an EIA 19-inch rack enclosure will certainly require two persons. Essentially, the technicians must attach the brackets to the MultiVOIP chassis with the screws provided, as shown in Figure 3-3, and then secure unit to rack rails by the brackets, as shown in Figure 3-4. Because equipment racks vary, screws for rack-rail mounting are not provided. Follow the instructions of the rack manufacturer and use screws that fit.

1.Position the right rack-mounting bracket on the MultiVOIP using the two vertical mounting screw holes.

2.Secure the bracket to the MultiVOIP using the two screws provided.

3.Position the left rack-mounting bracket on the MultiVOIP using the two vertical mounting screw holes.

4.Secure the bracket to the MultiVOIP using the two screws provided.

5.Remove feet (4) from the MultiVOIP unit.

6.Mount the MultiVOIP in the rack enclosure per the rack manufacture’s mounting procedure.

x

Figure 3-3: Bracket Attachment for Rack Mounting

Figure 3-4: Attaching MultiVOIP to Rack Rail

35