4.5.1.3Multi-Nets NAT
Multi-Nets NAT functions to allow the IP under LAN within multiple subnets to access the Internet via NAT.
Choose the menu Advanced→NAT→Multi-Nets NAT to load the following page.
Figure 4-25 Multi-Nets NAT
The following items are displayed on this screen:
¾Multi-Nets NAT
Subnet/Mask: Enter the subnet/mask to make the address range for the entry.
Description:Give a description for the entry.
Status: | Activate or inactivate the entry. |
¾list of Rules
You can view the information of the entries and edit them by the Action buttons.
The first entry in Figure 4-25indicates that: This is a Multi-Nets NAT entry named tplink1. The subnet under the LAN port of the router is 192.168.2.0/24 and this entry is activated. After the corresponding Static Route entry is set, the hosts within this subnet can access the Internet through the router via NAT.
Note:
●Multi-Nets NAT entry takes effect only when cooperating with the corresponding Static Route entries.
● For detailed setting of subnet mask, please refer to the Appendix B | FAQ |
-52-
