Appendix B FAQ

Q1. What can I do if I cannot access the web-based configuration page?

1.For the first login, please try the following steps:

1)Make sure the cable is well connected to the LAN port of the router. The corresponding LED should flash or be solid light.

2)Make sure the IP address of your PC is set in the same subnet addresses of the router. It’s recommended to set your PC to get the IP address automatically. Then the router with DHCP enabled can automatically assign the IP address to your PC. If you want to configure your PC manually, please set 192.168.0.x ("x" is any number between 2 to 254) for the IP address and 255.255.255.0 for the Subnet Mask.

3)Test the connection between your PC and TL-R480T+ via Ping command.

4)If you still cannot access the configuration page, please restore your router to its factory default settings and try to log in again.

2.If your management port has been changed, please log into the router with the new address, such as http://192.168.0.1:XX (“XX” is the new management port number).

3.If you had successfully logged into the router before, but now you cannot access the router. It’s quite possible that the configuration of your router has been changed by others, especially when the Remote Web Management function is enabled. You’re recommended to restore your router and reconfigure the management port number and the username as well as the password for your network security.

4.If you cannot access the router even after restoring the router to its defaults, or your login is dropped down just after a while, it’s quite possible that your router is attacked by ARP cheating. It’s recommended to locate and quarantine the source of ARP cheating so as to prevent your network from the attacks.

5.Check to see if you have configured the proxy server for IE browser. If so, please disable the IE proxy server first.

Q2: What can I do if I forgot the username and the password of the router? How to restore the router to its factory default settings?

You can restore the router to its factory default settings by the Reset button. It must be noted that once the router is reset, all the current configuration settings will be lost.

With the router powered on, use a pin to press and hold the Reset button (about 5 seconds). If the SYS LED is flashing 5 times in high frequency, release the Reset button. It means the router is restored successfully. The default management address of the router is http://192.168.0.1, and the default username and the password are both admin.

-114-

Page 118 Page 120
Page 119
Image 119
TP-Link 1910010933 manual Appendix B FAQ
Page 118 Page 120

1910010933 specifications

The TP-Link 1910010933 is a versatile and advanced networking solution designed to enhance connectivity for both home and office environments. This device exemplifies TP-Link's commitment to delivering reliable and high-performance networking products. With its cutting-edge technologies and features, it caters to the evolving demands of modern users.

One of the standout characteristics of the TP-Link 1910010933 is its robust Wi-Fi performance. It supports the latest Wi-Fi 6 technology, which significantly increases throughput speeds, allowing multiple devices to connect simultaneously without sacrificing performance. This is particularly beneficial in households with numerous connected devices or in small offices where bandwidth is a critical factor.

The device is equipped with dual-band capabilities, operating on both the 2.4GHz and 5GHz frequencies. The 2.4GHz band provides a broader coverage area, ideal for devices that don’t require high-speed connections, while the 5GHz band offers faster connections for bandwidth-intensive applications such as gaming and 4K streaming. This dual-band functionality ensures that users can enjoy seamless connectivity in any situation.

Security is another focal point of the TP-Link 1910010933. It comes with advanced security protocols including WPA3, which enhances the protection of your network against unauthorized access and potential threats. Additionally, the device features a built-in firewall and supports MAC address filtering, ensuring that only authorized devices can connect, further securing your network.

The TP-Link 1910010933 also incorporates smart features that enhance user experience. It includes parental controls that allow users to manage their children’s internet access, blocking inappropriate content and managing screen time effectively. Furthermore, using the TP-Link app, users can easily monitor their network, manage connected devices, and troubleshoot issues remotely.

The installation process of the TP-Link 1910010933 is user-friendly, requiring minimal technical knowledge. With its intuitive interface and guided setup, even those less familiar with technology can configure their home network quickly and efficiently.

In summary, the TP-Link 1910010933 is a feature-rich networking solution that leverages advanced technologies to provide high-speed, secure, and reliable connectivity. Whether for personal use or for a small office setup, this device stands out as a practical choice for enhancing the overall internet experience. With its combination of performance, security, and ease of use, it is well-positioned to meet the needs of today's digital users.
Top Page Image Contents