Note:
●For the users in the private network and not being set access rule, the default Policy is Allow.
●To specify all IP addresses, type “0.0.0.0 / 32” in the Policy field.
●For detailed setting of subnet mask, please refer to Appendix B FAQ.
4.6.4.4Service
The Service function allows you to specify the protocol and port number to be filtered for Firewall function conveniently. Protocol name and port range constitute a service type. The router predefines three commonly used services such as HTTP, FTP and TELNET and you can also add customized services if needed.
Choose the menu Firewall→Access Control→Service to load the following page.
Figure
The following items are displayed on this screen:
¾ Service |
|
Name: | Enter a name for the service. The name should not be more than 28 |
| characters. The name will display in the |
| Access Rule page. |
|
