Operating Manual -
12.SPECIFICATIONS
12.1Output Power:
Maximum Average Power, 0.1% THD, 1KHz
RMS Watts Per Channel, Both Channels Driven
8 ohms: 40W
4 ohms: 60W
Bridged Mono Mode:
8 ohms: 120W
FTC Continuous Power, 0.1% THD, 20Hz-20KHz
RMS Watts Per Channel, Both Channels Driven
8 ohms: 40W
4 ohms: 55W
12.2Frequency Response:
±0.2dB 20Hz - 20KHz
12.3Total Harmonic Distortion (35W/ch.):
.01% 1ΚΗz, 8Ω
.05%
12.4IM Distortion (35W/ch.):
(SMPTE): .01% 8Ω
12.5Output Hum And Noise:
(dB below full output 20Hz - 20KHz, unweighted) >100dB
12.6Damping Factor: >200 into 8Ω, <1KHz
12.7Full Power Input Sensitivity: switchable .775Vrms/.245Vrms
12.8Voltage Gain:
switchable 26.0dB/36.0dB
12.9Input Impedance: 20KW balanced
12.10Bandwidth:
100KHz
12.11Slew Rate:
20V/μS
12.12Rise Time:
2μS
12.13 Power Requirements:
12.14Shipping Weight:
20 lbs.
Specification conditions are 120VAC 60Hz at 25°C.
13.WARRANTY POLICY
We thank you for your expression of confidence in Ashly products. The unit you have just purchased is protected by a limited five year warranty. To establish the warranty, you must first complete and mail the war- ranty card attached to your product.
Fill out the information below for your records.
Model Number _________________________________
Serial Number _________________________________
Dealer ________________________________________
Date of Purchase _______________________________
Dealer’s Address _______________________________
_______________________________________________
_______________________________________________
Dealer’s Phone _________________________________
Salesperson ____________________________________
OTHER INFORMATION:
_______________________________________________
_______________________________________________
_______________________________________________
12