Sony SLV-D360P, SLV-D560P Setting up the remote commander, Inserting the batteries

Step 2 : Setting up the remote commander

Inserting the batteries

Insert two size AA (R6) batteries by matching the + and – on the batteries to the diagram inside the battery compartment.

Insert the negative (–) end first, then push in and down until the positive

(+) end clicks into position.

Using the remote commander

Remote sensor

You can use this remote commander
to operate this DVD-VCR and a Sony
TV. Buttons on the remote
commander marked with an orange
dot (•) can be used to operate your
Sony TV.	TV /
If the TV does not have the	DVD·VIDEO
symbol near the remote sensor, this	SELECT
remote commander will not operate	VIDEO
	SELECT
the TV.
	DVD

To operate	Set TV / DVD·VIDEO to
the DVD player	DVD·VIDEO, then press SELECT DVD and point at the remote sensor at
	the DVD-VCR
the VCR	DVD·VIDEO, then press SELECT VIDEO and point at the remote sensor
	at the DVD-VCR
your TV	TV and point at the remote sensor at your TV

Notes

•With normal use, the batteries should last about three to six months.

•If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage.

•Do not use a new battery with an old one.

•Do not use different types of batteries.

•Do not leave the remote commander in an extremely hot or humid place.

•Do not drop any foreign object into the remote casing, particularly when replacing the batteries.

•Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a malfunction.

10

Setting up the remote commander