Humax CRCI-5500 manual Manual Search, Symbol Rate, FEC Forward Error Correction, Network Search

Manual Search

Set the search parameters(Frequency, Symbol Rate, etc.) to manually find the services that you have selected in the transponder.

The bar on bottom of the submenu shows the signal quality(BER) of the entered parameters.

Antenna Alternative

Select the target antenna for Manual Search.

The Satellite Name helps you select Antenna Alternatives.

This is only for reference and cannot be changed on this menu.

Frequency

Use the Numeric buttons(0~9) on the remote control unit.

Polarisation

Use the	buttons to select the Polarisation of the transponder.
(Auto, Horizontal, Vertical)
• Horizontal :			18 V are output through LNB line
• Vertical		:	13.5 V are output through LNB line

Symbol Rate

Inputs the Symbol Rate of the transponder you want to find.

Use the buttons or Numeric buttons on the remote control unit.

FEC (Forward Error Correction)

Use the buttons to select the Forward Error Correction of the transponder. You can select the value of Auto, 1/2, 2/3, 3/4, 5/6 and 7/8.

Network Search

•You can select Yes or No. When you select “Yes”, you can find more transponders using the home network.

•As it refers to NIT during searching, if there is the frequency information of other transponder, it searches the other transponder besides the transponder that the user inputs.

Automatic Skip

•You can select Yes or No. When you select “Yes”, the search will skip all scrambled services.

•When the found services are scrambled during searching, they are not listed up.

Refer to descriptor of PMT whether it is scrambled or not.

26