Xerox 701P21091 manual Options 54. Tcode Tassign parameter options and definitions, Tcode Treset

Specifying input parameters

Options

Table 2-54. TCODE TASSIGN parameter options and definitions

Option	Definition
typespec	A typespec may be coded as a single integer, n. When coded as a single
	integer, the value must be in the range of 0 to 7. When coded as a series of
	integers, the values must be within the range of 1 through 7.
	NUMERIC may be used instead of 1; ALPHA may be used instead of 2.
inputspec	An inputspec may be coded as a single character, char, as a series of
	characters, (char [,...]), or as a range of characters, (char1, – , char2). The
	syntax char1, , char2 means the set of input codes corresponding to characters
	bounded by and including char1 and char2 (refer to appendix D for relative
	order of characters).

TCODE TASSIGN When a typespec is coded as a 0, all characters specified by an parameter: point inputspec are disassociated from all type code assignments.

to note Thus, the TASSIGN parameter may untype a specified set of characters.

When a typespec is coded with a single value (ranging from 1 through 7), all specified characters are associated with that type code. When a typespec is coded as a series of values (all ranging from 1 through 7), the specified characters are each associated with all of the specified types.

Default No default

TCODE TRESET

Disassociates one or more characters (or all characters) in a set from one or more types.

Syntax ac: TCODE TRESET = {(typespec, ’inputspec’) (typespec, (’inputspec1’ [, ’inputspec2’] [,...])) ALL}

2-52 Using LCDS Print Description Language