Xerox 701P21091 manual Options 19. Destination Djde options and definitions, Duplex Djde, Capacity

Using Dynamic Job Descriptor Entries (DJDEs)

Options

Table 5-19. DESTINATION DJDE options and definitions

Option	Definition
BIN	Specifies delivery to the currently active output bin.
TRAY	Specifies delivery to the sample tray.
	NOTE: Use caution when selecting the sample tray because of its limited
	capacity.
EXPORT	Specifies that sheets will be sent to the bypass transport.
		DESTINATION DJDE: points to note

•Transparencies should be sent only to the sample tray.

•EXPORT is honored only if the bypass transport is specified on the LCDS Setup window as the output destination.

DUPLEX DJDE

Specifies whether printing is to occur on both sides of a page (duplex mode) or a single side (simplex mode). The choice takes effect on the next page boundary.

Type Page oriented

Syntax DUPLEX = {YES NO}

Options

	Table 5-20. DUPLEX DJDE options and definitions
Option	Definition
YES	Specifies that printing will occur on both sides of a sheet. (This is also called
	“two–sided printing.”)
NO	Specifies that printing will occur on only the front side of the sheet. (This is also
	called “one–sided printing.”

Using LCDS Print Description Language 5-25