Xerox 701P21091 manual Sample online JSL

PDL principles and procedures

CAUTION

Be sure to give a new name to the JSL file you have created. Otherwise, your new JSL may overwrite the default JSL in the “lcds” folder. (Overwriting can occur if you access the default JSL by selecting [Open} from the File menu on the Text Editor window instead of [Include].

•The name must end with the .JSL file extension.

•The name must be one to six characters in length (not including the .JSL extension).

15.Click [OK]. Your new JSL is stored on the system disk. You can now close the Text Editor window.

16.Compile the JSL to create a JDL file. (Refer to “Compiling a JSL,” later in this chapter, for this procedure.)

Sample online JSL

The following figure shows another example of an online JSL.

Note how comments are used to explain and identify parts of the

JSL.

Table 1-10. Sample online JSL

ONLINE: JDL;

/* System level commands */

VFU1:	VFU	ASSIGN=(1,4), ASSIGN=(2,10),
		ASSIGN=(3,16), ASSIGN=(4,22),
		ASSIGN=(5,28), ASSIGN=(6,34),
		ASSIGN=(7,40), ASSIGN=(8,46),
		ASSIGN=(9,66), ASSIGN=(10,52),
		ASSIGN=(11,58), ASSIGN=(12,64), TOF=4,
		BOF=66;
/* Tables and criteria */
T1:	TABLE	MASK='?', CONSTANT='HE?DE?PAGE';
C1:		CONSTANT=(1,10,EQ,T1), LINENUM= (1,10);
T2:	TABLE	CONSTANT='TRAILER PAGE';
C2:	CRITERIA	CONSTANT=(0,12,EQ,T2), LINENUM=(1,10);
T3:	TABLE	CONSTANT='EOJ';
C3:	CRITERIA	CONSTANT=(0,3,EQ,T3), LINENUM=(1,20)

1-60 Using LCDS Print Description Language