Step 8: Verify Installation, Operation and Cooktop Alignment

Before performing this procedure, verify that all packing materials were removed from inside the snorkel and that the grease filters and front panel have been properly installed. Refer to the Care and Use Manual for instructions regarding filter and front panel installation.

Plug the vent power cord into a proper electrical receptacle and ensure that the circuit is energized.

A.Raise the snorkel to its fully extended position by pressing the UP / DOWN push-button once. Do not hold the push- button. The elevating motor will stop when the snorkel reaches its full height. (Note: the blower will not operate unless the snorkel is fully raised).

B.Remove protective tape from top cap.

C.Turn the blower ON by selecting in turn each of the 3 speeds. Let the blower run several minutes at each speed to evaluate its operation.

D.With the blower running, lower the snorkel to its fully retracted position by pressing the the UP / DOWN push-but- ton once. The blower will immediately turn off.

E.With the blower on HIGH, close the windows and doors to the area to ensure that fan does not cause back drafting in any outlet vent for another appliance.

F.Raise and lower the vent again, and check to make sure that the top cap on the snorkel does not catch on the back edge of the cooktop when it is lowered. If interference occurs, adjust the position of the cooktop by moving it against the front edge of the countertop. Failure to eliminate interference may result in permanent damage to the vent. Also, ensure that the vent support legs have been properly secured to the cabinet base using the screws provided.

If the vent system does not operate satisfactorily during any of the above procedures, review all steps in these Installation Instructions to ensure that nothing has been omitted or overlooked. Also, refer to the Care & Use Manual for additional information or call Thermador Customer Support 1-800-735-4328.

19

Page 18 Page 20
Page 19
Image 19
Thermador UCVM30FS, UCVM36FS manual Verify Installation, Operation and Cooktop Alignment
Page 18 Page 20

UCVM30FS, UCVM36FS specifications

The Thermador UCVM36FS is a premium undercounter wine refrigerator designed for wine enthusiasts who demand the finest in preservation technology and aesthetics. With a sleek and modern design, this wine storage unit perfectly blends into any kitchen or entertainment area, providing both functionality and style.

One of the standout features of the UCVM36FS is its capacity to hold up to 36 standard wine bottles. This makes it an ideal choice for wine collectors and social hosts alike, allowing users to store a diverse collection of their favorite vintages. The adjustable shelves are crafted from natural wood, which not only adds a touch of elegance but also helps to cradle bottles and reduce vibration, a key aspect of wine preservation.

Temperature control is critical in wine storage, and the UCVM36FS excels in this area. It offers precise temperature settings, ranging from 4°C to 18°C (39°F to 65°F), ensuring that each type of wine can be stored at its ideal temperature. The dual-zone temperature management technology allows for separate settings for red and white wines, ensuring optimal conditions for both.

Another innovative technology featured in the Thermador UCVM36FS is its advanced cooling system. The unit utilizes a compressor-based cooling system with dynamic cooling technology, which helps maintain a consistent temperature throughout the refrigerator. Additionally, an efficient filtration system protects the wine from external odors and flavors, thus preserving its original taste and quality.

The UCVM36FS also incorporates a no-vibration design. Vibration can disturb sediments in wine, affecting flavor and quality; therefore, Thermador has engineered this model to operate with minimal vibrations. Furthermore, the energy-efficient LED lighting illuminates the interior without generating excess heat, allowing for easy viewing and selection of wines while remaining energy conscious.

A key characteristic of the Thermador UCVM36FS is its customizable design. The unit features a stainless-steel door with a glass panel, offering an elegant display of your wine collection while ensuring UV protection, which shields wines from harmful light exposure. The integrated design allows for a flush installation that enhances the kitchen decor.

In conclusion, the Thermador UCVM36FS undercounter wine refrigerator is equipped with advanced wine preservation technologies, ample capacity, customizable design, and meticulous temperature control, making it a standout choice for discerning wine lovers. Whether for personal enjoyment or entertaining guests, this unit promises to elevate your wine storage experience to new heights.
Top Page Image Contents