Xerox 701P21091 manual Tmode Djde options and definitions, TOF Djde, Syntax TOF = value Options

Using Dynamic Job Descriptor Entries (DJDEs)

Options

	Table 5-60. TMODE DJDE options and definitions
Option	Definition
width	The process direction measurement that will be used to determine the pitch
	mode.
	• For normal (long edge) feeding, this is usually a measure of the short edge
	of the widest paper being used in the report.
	• For short edge feeding (SEF) this measures the long edge.
	Width values can range from the 7 inch equivalent to the 17 inch equivalent.
widthunit	Unit of measure for the width of the paper.
	Can be IN (inches), CM (centimeters), DOTS, or XDOTS (600 spi dots).
	The default width unit is IN.

TOF DJDE

Specifies the number of lines from the top of the logical page to the first print line (Top Of Form).

Type Record oriented

Syntax TOF = value

Options

		Table 5-61. TOF DJDE options and definitions
Option	Definition
value	Specifies the Top Of Form line number. This specification is independent of
	channel assignments. It should be greater than or equal to 1 and less than or
	equal to the smallest line number assigned to a channel.
	The default is 1.
		TOF DJDE: points to note

•The TOF DJDE is applied before processing of the first data record following the DJDE record.

•Depending on the time of a page transition, the TOF DJDE may not take effect on the next record. In other words, even though a TOF DJDE is processed, a page transition may have occurred before the DJDE value could take effect.

Using LCDS Print Description Language 5-71