Alpine Comprehensive Guide to Defeat Setting for CDA 7892

Press the f UP or g DN button to select "INT."

SETUP Operation

BAND Rotary encoder

g DN f UP SETUP

Connecting to an External Amplifier

(CDA-7894/CDA-7893/CDA-7892 only)

When an external amplifier is connected, sound quality can be improved by stopping the power supply of the buit-in amplifier. The power output is set to OFF by the following procedure.

1 Press and hold the SETUP button for at least 3 seconds.

2 Press the f UP or g DN button to select "PWR- IC" (CDA-7892: "PWR").

3 Press the BAND button to toggle the mode between PWR-IC ON (CDA-7892: PWR ON) and PWR-IC OFF (CDA-7892: PWR OFF).

PWR-IC OFF (CDA-7892: PWR OFF):

When activating the speakers, this setting can be performed by connecting between the front and rear pre-amplifier of the unit and the external amplifier. In this setting, nothing is output to the speakers.

Front

PWR-IC ON (CDA-7892: PWR ON):

The speakers are driven by the built-in amplifier.

Speakers

SPEAKER

RIGHT FRONTFront right

SPEAKER

RIGHT REARRear right

SPEAKER

LEFT REARRear left

SPEAKER

LEFT FRONTFront left

NOTE

No sound is produced by the system when the power output is set to OFF

4 Press the SETUP button to return to normal mode.

Setting the Defeat of the External Input

When auxiliary devices such as a TV or video game, etc., are used with this unit, you can use the audio function to set the mode between BASS, TREBLE and MX Defeat ON/OFF.

1 Press and hold the SETUP button for at least 3 seconds.

2

3 Press the BAND button to toggle the mode between INT ON and INT OFF.

Amplifier

left

When using Initial mode, set this to ON.

When the Initial mode is not selected, set this to OFF.

Front

right

Rear

Amplifier left

Rear right

4 Press the SETUP button to return to normal mode.

16-EN