
CD Player Operation
SOURCE
g DN f UP | REPEAT c |
Opening and Closing the Movable display
1 Press the c button.
The movable display will open.
To close the movable display, press the c button again.
The movable display will close.
NOTES
•Do not apply shock to the movable display when it is open as it may result in malfunction of the unit.
•The display may be dim during low temperatures and immediately after turning on the power. The brightness will return to normal as time elapses.
•The display will stop at the set angle when closing.
CAUTION
Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.
Playback
1 Press the c button.
The movable display will open.
Insert a disc with the label side facing up.
2 Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically. The movable display will close and playback will begin. When a disc is already inserted, press the SOURCE button to switch to the CD mode.
The mode will change every time the button is pressed.
→TUNER → CD → CD CHANGER∗
(∗ Only when the CD changer is connected)
3 To pause playback, press the
Pressing the
4 To eject the disc, press the c button.
NOTES
•Do not insert or remove a CD when loading or ejecting a CD, as malfunction may result.
•If the CD does not eject, press c button again for more than 3 seconds with the movable display open.
About discs that can be used with the
We recommend using only compact discs containing the marks shown below.
You can play
•Some of the following CDs may not play on this unit: Flawed CDs, CDs with fingerprints, CDs exposed to extreme temperatures or sunlight (e.g., left in the car or this unit), CDs recorded under unstable conditions, CDs on which a recording failed or a
•Use discs with MP3 files written in the format compliant with ISO 9660 level 1 or level 2. For details, see page