Navigating the Menus
The Menu key lets you select options to set up and use the scanner. To select a menu item, rotate the scroll control. Rotate right for down and left for up.
The
To exit all menus and return to the previous mode, press Avoid.
Data Naming
Name any Favorites List, System, Site, Department, Channel, Location, Custom Search, Recording Session,
To Enter a Character, turn the scroll control until the character you want appears. To move the cursor to the right, press 6>.
To move the cursor to the left, press <4.
To clear a character, press ./no.
To clear all characters, press ./no twice.
Press E/yes when finished to exit.
Display MENU
Press Menu and then scroll to Display Options and press E/yes.
Scroll to the options below and press E/yes.
Set Backlight | Set ID Format (MOT/P25) |
Adjust Contrast | Set ID Format (EDCS) |
Disp.. Unit ID | Set |
Setting the Backlight – The scanner will turn on/off the LCD and the Keypad backlight automatically according to backlight setting.
Set Mode
Note: (BCD536HP Only) Keypress and Squelch settings will work only when the backlight is Off.
Squelch
Off - The backlight stays off when the squelch opens.
5 sec - The backlight stays on 5 seconds after the squelch opens.
10 sec - The backlight stays on 10 seconds after the squelch opens. Open Squelch - The backlight stays on only when the squelch is open.
Keypress
Off - The backlight stays off when any key is pressed.
5 sec - The backlight stays on for 5 seconds when any key is pressed. 10 sec - The backlight stays on for 10 seconds when any key is pressed.
Timeout (BCD436HP Only)
26
