Uniden Essential Guide to Fire Tone-Out Setup for Two-Way Radios

Set Audio AGC

This allows you to turn AGC (Automatic Gain Control) on or off for Tone-Out operations. The default setting is Off.

Analog - Press E/yes to toggle On or Off.

Fire Tone-Out Standby/Search

Press Menu. Scroll to Tone-Out for... and press E/yes.

Scroll to Tone-Out Standby and press E/yes.

(BCD536HP Only) press FUNC then SQ. See also Set Search Key.

Scroll to monitor a Tone-Out channel (0-31). Press Func then System to exit.

Tone-Out

Standby Status

Tone-Out channel name

Tone A	and B	Tone	-Out
frequency		channel

Tone-Out Standby Mode

Any transmission received on the frequency will not be heard but you will still see the signal strength bars.

To monitor a different frequency, scroll to a tone-out (channel) with a different frequency.

If you press Channel while in Standby/Search mode, the scanner temporarily exits and you will be able to hear any transmissions on that frequency. No alerts sound, even if a tone-out matches one you have programmed in hold mode. Press Channel again to return to Standby/Search mode.

If the scanner finds tones in Tone-Out Search mode, you will see Set Found Tone A and B? after you press E/yes to save.

Tone-Out Search Mode

Select a Different Tone-Out

Turn the Scroll Control.

Listen to Tone-Out Frequency

Press Channel.

77