Uniden BCD436HP, BCD536HP owner manual Programming Departments, New Department/Department Options

Latitude - Bottom Right

Enter the latitude. Press ./no to toggle N or S, and press E/yes.

Longitude - Bottom Right

Enter the longitude. Press ./no to toggle E or W, and press E/yes.

Stored Rectangle

Edit Rectangle See Rectangles above.

Delete Rectangle

At Confirm Delete? press E/yes or ./no.

P25 Waiting Time (Motorola Only) – This setting gives the scanner time to determine if channels on mixed Motorola Systems have digital or analog transmissions. During this time, the scanner will evaluate the received signal and, if it detects digital data, will open squelch immediately. If digital is not detected before the delay expires, the scanner will open squelch at the end of this delay. This is to prevent “false decode” problems. This setting only affects channels with an Audio Type set to All. The default setting is 400 ms.

0 to 1000

Note: Any analog transmissions will lose the first part of the transmission, up to the wait time you set here.

P25 Threshold Mode (P25/Motorola)

The default setting is Auto.

Auto. Automatically sets the decode threshold based on the received signal.

Manual. Allows you to manually set the threshold in threshold setting mode by using the P25 Threshold Level setting.

Default. Sets the scanner to the default threshold of 8, Auto. P25 Threshold Level (P25/Motorola) – The default setting is 8.

0 to 20

Delete Site – Deletes the Site.

At Confirm Delete? press E/yes or ./no.

New Site – See New Site.

Programming Departments

New Department/Department Options

Press Menu then scroll to Manage Favorites and press E/yes.

Scroll to the Favorites List and press E/yes.

Scroll to Review/Edit System and press E/yes.

Scroll to the System and press E/yes.

Scroll to Edit Department and press E/yes.

To Create a New Department, scroll to New Department and press E/yes. To Edit an Existing Department, scroll to the Department and press E/yes.

44