Set Delay
This sets the Delay when monitoring a site or frequencies.
0, 1, 2, 3, 4, or 5 sec.
Set Logging
This will log all hits or just new hits.
All or New Only
Set Compare to Database
Select On to compare hits against the channels already in the Database. Only new channels will have audio recorded (if enabled). Select Off to treat all hits as new channels.
On or Off
Set Record Duration
This sets how much audio will be recorded for each new channel.
None, 30, 60, 90, 120, 150, 180, 300, or 600 sec.
Set Time-Out Timer
This is used to keep a stuck channel from stealing the whole Run in a session. Off, 10, 30, or 60 sec.
System Information (Trunking Only)
This will give you where it came from, (Full Database or Favorites List), the System Type, (Motorola, P25, etc.), and the System used for the Discovery Session.
Set Auto Store
This turns Auto Store on and will create a System called Conventional or Trunking Discovery.
On or Off
Delete Session
This deletes the session.
At Confirm Delete? Press E/yes or ./no.
Change System (Trunking Only)
This allows you to create or change the System used and change the Site used for the session.
Input System Name
Press E/yes to Skip if System is saved.
See Data Naming.
Select System
Select the System to use for the session.
Select Site
Select the Site to use for the session.
62
