At Confirm?, press E/yes or ./no.
Nothing Avoided appears if nothing is Avoided.
Set Audio AGC – This allows you to turn AGC (Automatic Gain Control) on or off for the System. The default settings are Off.
Analog - Press E/yes to toggle On or Off.
Digital - Press E/yes to toggle On or Off.
P25 NAC Option (P25 One Freq) – This allows you to have the scanner search for NAC codes or you can program a specific code for the System.
The default setting is Search.
Search. The scanner opens squelch for any digital signal and displays the NAC being used.
Set P25 NAC. The scanner opens squelch only for signals that include the programmed NAC.
At Input P25 NAC, see Data Naming.
P25 Waiting Time (Conventional Only) – This setting gives the scanner time to determine if channels on Conventional Systems have digital or analog transmissions. During this time, the scanner will evaluate the received signal and, if it detects digital data, will open squelch immediately. If digital is not detected before the delay expires, the scanner will open squelch at the end of this delay. This is to prevent “false decode” problems. This setting only affects conventional channels with an Audio Type set to All. The default setting is 400 ms.
0 to 1000
Note: Any analog transmissions will lose the first part of the transmission, up to the wait time you set here.
P25 Threshold Mode – (Conventional Only)
The default setting is Auto.
Auto. Automatically sets the decode threshold based on the received signal.
Manual. Allows you to manually set the threshold in threshold setting mode by using the P25 Threshold Level setting.
Default. Sets the scanner to the default threshold of 8, Auto. P25 Threshold Level (Conventional Only) – The default setting is 8.
0 to 20
Programming Sites
New Site/Site Options
Press Menu then scroll to Manage Favorites and press E/yes.
Scroll to the Favorites List and press E/yes.
Scroll to Review/Edit System and press E/yes.
Scroll to the System and press E/yes.
Scroll to Edit Site and press E/yes.
To Create a New Site, scroll to New Site and press E/yes.
To Edit an Existing Site, scroll to the Site and press E/yes.
Note: Not all options will appear for all sites.
41
