ERROR CODES

 

 

 

DISPLAY

 

EXPLANATION AND RECOMMENDED PROCEDURE

 

Potential Causes

 

• If too much detergent was used, run the unit through a Rinse/ Spin cycle then a

 

 

Normal cycle without adding any detergent. This should clear the unit of the

 

 

excess detergent.

 

• Check the drain hose and make sure it is not plugged or kinked

 

• Check Wire Harness connections to the Drain Pump, Pressure Switch, and

 

 

Central Control Unit (CCU)

 

• Check/ Clean Drain Pump Filter of foreign objects

 

Check Drain Pump

 

• Check the Pressure Switch

 

Check CCU

 

 

F/dL

Door Lock Error

 

A Door Lock Error occurs if the door cannot be locked. It will try to lock it 6 times

 

before displaying the error.

 

Potential Causes

 

• Door Lock Mechanism broken or removed from the Door

 

• Check Door Lock/Switch Assembly

 

• Check the wire harness connections to the Door Lock/Switch Assembly and

 

 

Central Control Unit (CCU)

 

• Door Lock/Switch Assembly Failure

 

 

F/dU

Door Unlock Error

 

A Door Unlock Error occurs if the door cannot be unlocked. It will try to unlock the

 

door 6 times before displaying the error.

 

Potential Causes

 

• Door Lock Mechanism broken.

 

• Check Door Lock/Switch Assembly for foreign objects

 

• Check Wire Harness connections to the Door Lock/Switch Assembly and Central

 

 

Control Unit (CCU)

 

• Door Lock/Switch Assembly Failure

 

Note: The Door Lock/Switch Assembly can be manually unlocked. See Section

 

Seven, TECH TIPS

 

 

 

6 - 7

Page 51
Image 51
Whirlpool GHW9100L, GHW9200L manual Door Lock Error, Door Unlock Error, Seven, Tech Tips