!WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death or electrical shock.
COMPONENT CHECKS
Continuity checks can be made on various components of the washer from the connectors on the Central Control Unit. Before performing any of these tests, disconnect the washer from the wall outlet. In addition, disconnect the wiring harness connector from the Central Control Unit before making any continuity tests.
Pressure Switch
The pressure switch can be checked at various water levels. Disconnect the pressure switch connector from the control box.
|
|
|
| Water Level | Test Points | Reading | |
|
|
|
| Empty | 4 to 6 | 0 ohms | |
6 | 5 | 4 | 3 2 1 | Suds Detect | 1 to 2 | 0 ohms | |
L1 | 4 to 5 | 0 ohms | |||||
|
|
|
| ||||
|
|
|
| Overflow | 3 to 4 | 0 ohms |
Temperature Sensor |
| |
|
|
|
| Temperature | Results |
| 32° F (0° C) | 35.9K Ω |
| 86 ° F (30° C) | 9.7K Ω |
| 104° F (40° C) | 6.6K Ω |
| 122° F (50° C) | 4.6K Ω |
| 140° F (60° C) | 3.2K Ω |
| 158° F (70° C) | 2.3K Ω |
| 203° F (95° C) | 1K Ω |
|
|
|
Dispenser Switch and Motor |
|
| |
|
| Test Points | Reading |
65 3 1 | Switch | 6 to 5 | 0 ohms |
| Motor | 3 to 1 | 1400 ohms |
5 - 2
