Sorting TV channels automatically (Follow TV)
When the automatic channel search function is activated, the TV channels are saved in a specific order. This may vary from the order of TV chan- nels on the TV.
This function changes the order of TV channels saved in the video recorder to match that of the TV.
Make sure that the video recorder and the TV are connected by a scart cable.
1.Switch on the TV. If required, select the pro- gramme number for the video recorder.
2.Press MENU . The main menu will appear.
3.Select 'TUNER SET UP' with |
| K B |
|
| L C | and | ||||
confirm with |
| . |
|
|
|
|
|
|
| |
B 1 |
|
|
|
|
|
| ||||
4.Select 'FOLLOW TV' with |
|
|
|
|
|
| and | |||
K B |
| L C | ||||||||
confirm with |
| . |
|
|
|
|
|
|
|
|
B 1 |
|
|
|
|
|
| ||||
SELECT K L CHOOSE B
AUTO TUNING MANUAL TUNING
→FOLLOW TV MOVE
END=EXIT
5.'P:01' will appear in the video recorder dis- play.
I cannot switch my TV set to programme number '1'
*If you have connected additional devices to socket AV2(DECODER), please disconnect these devices. Because of other connected devices, the TV set could switch to the pro- gramme number of the scart socket.
6.Select programme number '1' on the TV.
7.Confirm with B 1 on the video recorder
remote control. The video recorder compares the TV channels on the TV and the video recorder.
If the video recorder finds the same TV chan- nel as on the TV, then it stores it at 'P01'.
'NO TV SIGNAL' will appear in the TV screen. The video recorder is not receiving a video signal from the TV.
Check the plug on the scart cable.
Check your TV's operating instructions to see which scart socket is used for video signals.
If this does not help, it's not possible to use this function. Please read the section 'Sorting TV channels manually'.
8.Wait until the next number, e.g. 'P:02' appears in the display.
9.Select the next programme number on the TV, e.g. '2'.
10.Confirm with B 1 .
11.Repeat steps 8 to 10 until you have assigned a programme number to all TV channels.
12.To end, press STATUS/EXIT .
Automatic Tuning
During installation, all available TV channels are searched for and saved. If the channel assign- ments of your cable or satellite TV provider change or if you are
What does Easy Link do ?
With Easylink, TV channels are always trans- fered from the TV to the VCR. A new TV chan- nel must be tuned on the TV set. The transfer is then done automatically to the VCR.
1.Switch on the TV. If required, select the pro- gramme number for the video recorder.
2.Press MENU . The main menu will appear.
3.Select 'TUNER SET UP' with |
| K B |
|
| L C |
| and | |||||||
confirm with |
|
| . |
|
|
|
|
|
|
|
|
| ||
B 1 |
|
|
|
|
|
|
|
|
| |||||
4.Select 'AUTO TUNING' with |
|
|
|
|
|
|
|
| and | |||||
| K B |
|
| L C |
| |||||||||
confirm with |
|
| . |
|
|
|
|
|
|
|
|
|
| |
B 1 |
|
|
|
|
|
|
|
|
| |||||
PLEASE WAIT
STARTFINISH
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
5.The automatic TV channel search starts. This allows the video recorder to save all available TV channels. This procedure may take sever- al minutes.
6.When the TV channel search is complete, 'COMPLETED' will briefly appear on the TV screen.
10 | EN |
|
