Polycom VR630/07 manual Important notes regarding operation, Specifications

OPERATING INSTRUCTIONS

Thank you for buying a Philips video recorder. This video recorder is one of the most sophisti- cated and easy-to-use video recorders (VCR) on the market. Please take the time to read this operating manual before using your video recorder. It contains important information and notes regarding operation. The video recorder should not be turned on immediately after transportation from a cold to a hot area or vice versa, or in conditions of extreme humidity. Wait at least three hours after transporting the device. The video recorder needs this time in order to become acclimatised to its new environ- ment (temperature, air humidity, etc.).

PAL

This video recorder is used for the recording and playback of VHS videocassettes. Cassettes with the VHS-C label (VHS cassettes for camcorders) may only be used with a suitable adapter.

We hope you enjoy your new video recorder.

Important notes regarding operation

Danger: High voltage!

"Do not remove the top cover as there is a risk of an electrical shock!

The video recorder does not contain any

"components that can be repaired by the customer. Please leave all maintenance work for qualified personnel.

As soon as the video recorder is connected

"to the power supply, there are some compo- nents that are in constant operation. To switch off the video recorder completely you must disconnect it from the power supply.

Make sure that air can circulate freely

!through the ventilation slots on the video recorder. Do not place the device on an unsteady base.

Make sure that no objects or liquids enter

!the video recorder. Do not place vases or the like on the video recorder. If liquid is spilt into it, immediately disconnect the video recorder from the power supply and call After-sales Service for advice.

Do not place any combustible objects on

!the device (candles, etc.).

Make sure that children do not place any

!foreign objects within the openings or venti- lation slots.

These operating instructions have been printed on non-polluting paper.

Deposit old batteries at the appropriate col-

lection points.

Please make use of the facilities available in your country for disposing of the packaging of the video recorder in a way that helps to protect the environment.

This electronic device contains many mate- rials that can be recycled. Please enquire about the possibilities for recycling your old device.

VIDEO Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation. The VIDEO Plus+ system is manufactured under license from Gemstar Development Corporation.

For VR830

So that you can identify your machine for service questions or in the event of theft, enter the serial number here. The serial number (PROD.NO.) is printed on the type plate fixed at the back of the device. Also, we suggest that you put a mark with your VCR MODEL NO..

MODEL NO. : VR630/07, VR730/07,

VR732/07, VR830/07, VRQ45/07

PROD. NO. ...........................

This product complies with the requirements of Directive 73/23/EEC +89/336/EEC +93/68 EEC.

Specifications

Voltage: 230-240V/50Hz

Power consumption : 20W

Power consumption (Standby): less than 4W (PWR. in the display switched off)

Rewind time: approx. 100 seconds (cassette E- 180)

Dimensions in cm/ft (WxDxH): 36.0x22.6x9.2 / 1.2x0.3x0.9

Number of video heads : 4

Number of video heads (HIFI): 2

Recording/playback time: 3 hours (SP) (cas- sette E-180)

6 hours (LP) (cassette E-180)

2 EN