2. Important notes for operation
Switching on
You can switch on the video recorder with the
STANDBY/ON y button.
Automatic switch-off
If the video recorder is not used for several minutes, it switches itself off automatically. This function can be deactivated (e.g. if you want to use the video recorder as a TV receiver). For more information, please read the section 'Automatic
Time in the display
If you have switched the video recorder off with 
, the time will show in the
display, e.g. '18:00'.
If the clock has not been set, '
Power consumption
The video recorder should always be connected to the mains so as not to affect the use of the TV or programmed recordings.
Your video recorder uses less than 4W.
Power outage/no power
Channel information remains saved for up to 10 year, the time and timer information is saved for up to 1 minute.
Navigation in the screen menu
You can check/change many functions and set- tings of your video recorder via the
Call up the menu: with | MENU | . | |||
To select: with |
|
|
| .To enter or change | |
K B | L C | ||||
your selection: with the number buttons 0..9 or with K B 
L C .
To save or confirm: with B 1 .
To cancel: with CLEAR .
To end: with STATUS/EXIT .
SELECT K L CHOOSE B
→TIMER RECORD SET UP VCR SET UP TUNER SET UP INITIAL SET UP
END=EXIT
The symbols on your video recorder display
PWR. 
REC
These symbols can light up on your video recorder display:
PWR When you keep your video recorder on.
When you have put a cassette in the video recorder.
Display of programme number of the TV channel / time / RF channel.
REC When you record.
When you have programmed a recording.
7 | EN |
|
