Manual TV channel search
In some cases it can occur that all TV channels are not found and saved during the first installa- tion. In this case, the missing TV channels must be searched for and stored manually.
1.Switch on the TV set. If required, select the programme number for the video recorder.
MENU .
The main menu will appear.
to select 'TUNER SET UP'. Then press B 1 .
to select 'MANUAL TUNING'. Then press B 1 .
5.Select 'PROG.' with 
B 1 .
MANUAL TUNING
→PROG. P55
CHANNEL 055
DECODER [OFF]
SKIP[OFF]
SELECT K L CHOOSE B
END=EXIT
or 
, select the desired programme number that you want to use for the TV channel, e.g. 'P01'. Then press B 1 .
What is a special channel?
TV channels are transmitted in certain pre- defined frequency ranges. These ranges are divided into channels.
A specific frequency/channel is assigned to each TV station.
Certain frequency ranges are specified as spe- cial channels (hyperband channels).
7.Select 'CHANNEL' with K B 
L C , and con- firm with B 1 . Then enter the desired chan- nel with 0..9 .
If you set 'SKIP' on for a channel, this channel will be ignored when going through the channels with P+ or
I don't know the channels for my TV stations
In this case, press K B 
L C in 'CHANNEL' to
start the automatic channel search. A changing channel number will appear on the TV screen. Continue the automatic search until you have found the desired TV channel.
8.Save the TV channel with B 1 .
9.To search for other TV channels, begin again at step 5.
10.To end, press STATUS/EXIT .
Using the satellite receiver
Satellite channels from a satellite receiver (con- nected to the scart socket AV2(DECODER) ) are received on the video recorder on programme number 'AV2' with 0.0.2.
You should select the satelite channels to be received by the satellite receiver directly on the receiver itself.
9 | EN |
|
