Pioneer DV-655A operating instructions Getting Started Switching on, Let’s Get Started

Getting Started

Switching on

After making sure that everything is con- nected properly and that the player is plugged in, press STANDBY/ON on the front panel, or on the remote control to switch the player on.

Also, switch on your TV and make sure that it is set to the input you connected the DVD player to.

STANDBY/ON

OPEN/CLOSE

0

STANDBY/ON

PROGRESSIVE VIDEO OFF 41 ¡

Î

•My DVD player switches on but there is nothing displayed on my TV.

Make sure that the TV is set to the correct video input (not a TV channel). For example, if you connected this player to the VIDEO 1 inputs on your TV, switch your TV to VIDEO 1.

•If you connected this player to an AV receiver, make sure that the receiver is switched on and set to the correct input.

•You can also use the 0 OPEN/CLOSE button to switch on the player and open the disc tray at the same time.

•This player features a screen saver.

If the player is stopped or paused and no button is pressed for five minutes, the screen saver starts.

04

Let’s Get Started

When you switch on the player for the first time, you should see a welcome screen displayed on your TV. From here you can set up the player to work with the kind of TV you have, then either use the Setup Navigator to make more settings, or jump right in and start playing some discs.

Before continuing, make sure that you’ve loaded the batteries in the remote control.

•For customers in Taiwan: The default on- screen menu language is Traditional Chinese. Use the instructions below to complete the Let’s Get Started setup, then see page 72 for instructions on changing the on-screen display lan- guage to English.

ENTER

GUIDE RETURN

23

En