Pioneer DV-655A operating instructions Controlling this player from another Pioneer component

Connecting Up

Controlling this player from another Pioneer component

This player has SR jacks which allow you to use the remote sensor on one Pioneer component to control another.

Use a mini-jack plug to connect the CONTROL OUT of one component to the CONTROL IN of another. In this way you can daisy-chain several components together.

CONTROL
OUT	Pioneer AV receiver

DV-656A

		OPTICAL	COAXIAL	L		L	CENTER
IN	OUT						AUDIO OUT		Y	PB	PR
							(5.1ch)
				R		R	SUB
CONTROL		DIGITAL AUDIO		AUDIO	FRONT	SURROUND	WOOFER	VIDEO	COMPONENT VIDEO OUT
			OUT	OUT			S-VIDEO
							OUT	OUT
				(2ch)

CONTROL

IN

Pioneer CD player, etc.

02

•My TV doesn’t have any inputs to connect the DVD player. How can I watch DVDs?

Unfortunately, if your TV has no inputs you can’t use this player with it.

•My VCR is already connected to my TV, so there aren’t any spare inputs. What should I do?

If all your TV’s inputs are already in use, you can buy a video input selector from an electronics store, which effectively gives you more inputs.

•My TV only has one input for the sound. What should I plug it into?

If you don’t mind mono sound, you can buy a stereo RCA-to-mono RCA cable from an electronics store. Connect the stereo end to this player and the mono end to your TV.

If you want stereo sound, connect this player to your amplifier or stereo system using a stereo audio cable.

•I connected the DVD player to my AV receiver, and although the sound is fine, there’s no picture. What did I do wrong?

Make sure that the type of video connection from the DVD player to your AV receiver is the same as that from the receiver to your TV. Most AV receivers won’t convert from one kind of connec- tion to another.

17

En