Additional Information 09
75
En
Problem
No picture/No color.
Screen is stretched or aspect
does not change.
Picture disturbance during
playback or the picture is dark.
No audio, or audio is dis-
torted.
Cause / Remedy
•Check that the VIDEO OFF indicator is not lit. If it is, press the
VIDEO OFF button (page 18).
•Incorrect video connections: Check that connections are
correct and that plugs are inserted fully. Also check the video
cable for damage.
•TV/monitor or AV amplifier settings are incorrect: Check the
instruction manual of the connected equipment.
•The video ouput is set to progressive but your TV/monitor is
not compatible with progressive scan: Press the PROGRESSIVE
button on the front panel to set to interlace (the indicator above
the button should not be lit) (page 18).
•When set to progressive video output, there is no video output
from the composite or S-video outputs.
•The TV Screen setting in the Initial Settings menu is incorrect.
See page 67 for how to set it correctly for your TV/monitor.
•If your TV/monitor is connected using an S-video cable, try
changing the S-Video Out setting (page 53).
•This player is compatible with Macro-Vision System copy
guard. Some discs include a copy prevention signal, and when
this type of disc is played back, stripes etc., may appear on some
sections of the picture depending on the TV. This is not a
malfunction.
•Due to the player’s copy protection circuits, connection of this
device through a VCR or an AV selector may prevent recording or
cause picture problems. This is not a malfunction.
•The TV system may be set inappropriately. See Setting the TV
System on page 73.
•No audio is output during slow motion playback or when
scanning discs other than audio CDs
•Some DVD discs do not output digital audio: Switch your
amplifier to the player's analog outputs.
•Check that the disc is free from dust and dirt, and that it is not
damaged (page 65).
•Check that all interconnects are firmly inserted.
•Check that the plugs and terminals are free of dirt, oxide, etc.
and clean if necessary. Also check the cable for damage.
•Make sure the player's output is not connected to the
amplifier's phono (turntable) inputs.
•Check your amplifier/receiver’s settings (volume, input
function, speaker settings, etc.).