Pioneer DV-655A Initial Settings Menu CD Playback, Speakers, Audio Output Mode

08The Initial Settings Menu

CD Playback

• Default setting: PCM Playback

Initial Settings
Digital Audio Out	Parental Lock
		PCM Playback
Video Output	Bonus Group	DTS CD Playback
Language	Auto Disc Menu
Display	Group Playback
Options	DVD Playback Mode
Speakers	CD Playback

(DV-656A screen)

When set to PCM Playback, playback is optimized for standard audio CDs. You can also play DTS CDs, however you may notice some noise when a DTS CD starts playing. This is not a malfunction.

When set to DTS CD Playback, playback is optimized for DTS CDs. In this mode you cannot play standard audio CDs through the analog outputs. Change the setting back to PCM Playback to play standard CDs.

Speakers

Audio Output Mode

•Set in Setup Navigator (Default: 2 Channel)

Initial Settings
Digital Audio Out	Audio Output Mode
		2 Channel
Video Output	Speaker Installation	5.1 Channel
Language	Channel Level
Display
Options
Speakers

If you connected this player to your amplifier using the 5.1 channel analog outputs (front, surround, center and subwoofer outs), set this to 5.1 Channel; if you connected only the stereo outs, set to 2 Channel.

62

En

•Even if you set Audio Output Mode to 5.1 Channel, you’ll only get sound from all speakers when playing a multi- channel DVD-Audio disc, or Dolby Digital or DTS encoded DVD disc.

•When set to 5.1 Channel, only the front left/right channels are output from the AUDIO OUT (2ch) jacks. Change to

2 Channel if you want to listen to downmixed stereo audio (for example, because you are listening through the TV’s built-in speakers).

•When set to 5.1 Channel there is no digital output when playing DVD-Audio.

•If you set to 2 Channel, Dolby Digital, DTS and MPEG audio is mixed down to two channels so you still hear all the audio recorded on the disc.

•Some DVD-Audio discs don’t allow down-mixing of audio. These discs always output multi-channel audio regardless of the setting made here.

Speaker Installation

•Set in Setup Navigator (default: L/R:

Large C: Large LS/RS: LargeSW: On )

You only need to make this setting if you connected this player to your amplifier using the 5.1 channel analog outputs.

This setting does not affect digital audio output.

Initial Settings
Digital Audio Out	Audio Output Mode ‰ 5.1 Channel
Video Output	Speaker Installation
Language	Channel Level	‰ Fix
Display
Options
Speakers