Pressure Switch
Pressure Switch
The pressure switch is located in the top right rear corner of the washer. (Fig.
The pressure switch also senses the suds level in the wash tub. If excessive sudsing occurs, the washer starts an auto- matic suds routine. The display will show the word “Sud”. The automatic suds routine adds additional rinse and drain operations until the suds level is reduced.
If an overfill condition is detected by the pressure switch, the CCU will turn on the drain pump and attempt to stop filling.
Fig.
Customer Interface and Cycle Selection
Control On
Status
Indicators
Fig.
Wash Cycle
Selector
Control On - The Control On button must be pressed before initiating any cycle selection.
Status Indicators - These lights show which portion of the cycle the washer is operating. They also indicate when additional items can be added to the wash cycle and when the controls are locked.
Wash Cycle Selector - Choose a Wash Cycle by turning the knob to the desired cycle. Each cycle is designed for different types of fabric and soil levels. (See Table
Display - The display provides such information as time remaining for selected wash cycle and error codes.
Push to
Start
Display
Soil Level |
(Change |
Cycle Time) |
Pause/
Cancel
Soil Level - Pressing this button will change the length of the wash cycle. Heavy will add time to a normal wash cycle, light will shorten a normal wash cycle.
Push to Start - The Push to Start button must be pressed to initiate any wash cycle. Press and hold the START button for one second.
Pause/Cancel - Pressing this button will allow changing any option or changing a wash cycle after the wash cycle has begun. Press the PAUSE/CANCEL button, select the desired Op- tion, press and hold the START button for one (1) second. To cancel a cycle and select a new one, press the PAUSE/CANCEL button, select the new cycle, select the desired options, press and hold the START button for one (1) second.
3 - 3
