Factory default is ‘0’, 100, Default value 1 second

IS-101 Voice Mode AT Commands

Table 25. Voice Mode Command Descriptions (Continued)

Command	Default		Description

		Speakerphone Type Selection: This command determines which speakerphone type is used when
		the modem receives a +VSP=m command. This allows the application software to select whether
		telephone emulation or digital speakerphone is used for +VSP=m. Upon powering-up, the modem
		determines whether it can support a digital speakerphone mode. If digital speakerphone is supported,
#VSPS=m	1	then the factory default value is equal to ‘1’. If the digital speakerphone is not supported, then the
#VSPS=m	1	factory default is ‘0’.
		factory default is ‘0’.
		Range: 0, 1
		0	Telephone Emulation Mode speakerphone
		1*	Digital speakerphone

		Beep Tone Duration Timer: This command sets the default duration of all DTMF tones.
+VTD=m	100	Range: 5–255 (units of 0.01 seconds)
		100*	Default value (1 second)

NOTE: An asterisk (*) denotes the factory-default setting.

82	536EX Chipset Developer’s Manual

Intel Confidential

Page 82

Image 82

Intel 537EX manual Factory default is ‘0’, 100, Range 5-255 units of 0.01 seconds, Default value 1 second

537EX specifications

The Intel 537EX is a powerful and innovative embedded processor designed for a range of applications, particularly in the fields of industrial automation, telecommunications, and transport management systems. This processor is a member of Intel's embedded product line, tailored specifically to meet the demands of systems that require high reliability and long lifecycle support.

One of the main features of the Intel 537EX is its multi-core architecture, which enables efficient parallel processing capabilities. This allows for the execution of multiple tasks simultaneously, significantly improving overall system performance. The processor also incorporates Intel’s advanced power management technology, which ensures that the device consumes energy efficiently, enhances thermal performance, and prolongs the lifespan of the system.

The Intel 537EX supports a range of connectivity options, including high-speed Ethernet and Serial ATA interfaces. This ensures that it can easily integrate into existing systems, seamlessly supporting applications that require robust data transfer capabilities. Additionally, the processor is equipped with multiple I/O ports, facilitating the connection of various peripherals and sensors, which is crucial in industrial applications.

One of the standout technologies within the Intel 537EX is its support for hardware virtualization. This feature allows for the creation of multiple virtual environments within a single physical structure, optimizing resource utilization and enhancing system flexibility. Additionally, Intel’s integrated security technologies provide a significant layer of protection against potential threats, ensuring that embedded systems remain secure.

Another characteristic of the Intel 537EX is its extensive software support, which includes compatibility with various operating systems and development environments. This versatility makes it an attractive choice for developers looking to build or upgrade their embedded systems. With access to Intel's comprehensive software tools, developers can quickly optimize applications to take full advantage of the processor's capabilities.

The Intel 537EX also boasts excellent thermal performance, allowing it to operate efficiently in harsh environments. This is crucial for embedded applications in industrial settings where temperature fluctuations are common. Overall, the Intel 537EX is engineered to deliver high-performance processing power, superior connectivity, and enhanced security, solidifying its position as a reliable choice for demanding embedded applications.

Contents

537EX Chipset Developer’s Manual Intel Confidential Contents Figures Tables Date Revision Description Revision History001 Initial release Introduction Controllerless Modem Driver Overview Windows 95 and Windows Unimodem V.90/V.92 and V.34 Data ModesTapi Intelsdb.VXD Modem Connection Overview DCE-to-DCE Data Rates for Each Mode AT Commands OverviewDTE-to-DCE Data Rates for Each Mode DCE-to-ISP Data Rates for V.90 Mode DTE-Modem Data Rate Response Codes Sending CommandsDelayed Call Numeric Text Dial Modifier Command FunctionAT Escape Sequences Dialing digits Data Mode Command Summary Command Function Default Range Reported By &Vn Intel Confidential Intel Confidential Intel Confidential +ESR +EB+ESA +ETBM 44/V.42/V.42 bis MNP Command Summary Processes flow control characters and passes to local Fax Identity Command Summary Fax Class 1 Command Summary Voice DTE→DCE Character Pairs IS-101 Voice Command SummaryResponse Hex Code Function DEL Voice DTE →DCE Character PairsVoice DTE←DCE Character Pairs ESC Register Summary Register Function Default Range Units Reported by &VnDial Modifiers Ascii Register Function Default Range Units Modem Responses and Command Echo En, Vn, Xn, Wn, Qn Using AT Commands to Access the S-Registers Sn?, Sn=x, ?Modem Setup Host Modem Response Command Data Reporting Wn Mapping Disable EnableDTE Resets and then configures the modem to Nvram user profile Establishing a Modem Connection A, D, DS = n, S0 AT Commands Product InformationProduct Identification Information Hanging Up Hn, S10, Zn, &D2 Online Command Mode Escape Codes, OnModem-to-Modem Connection Data Rates Intel Confidential Modem-on-Hold Incoming Voice Call in Data Mode Modem-on-Hold Initiating a Voice Call in Data Mode Intel Confidential Supported Modulation Types Carrier Description Diagnostic Testing S18, &Tn Local Analog Loopback AT&T1 Local Analog Loopback With Self-Test AT&T8 Local Modem or Test Modem Time-Independent Escape Sequence AT Escape SequencesLicensing Requirements for Hayes Escape Sequence Example Command Default Description Data Mode Command DescriptionsHayes* Escape Sequence Echo disabled Previously stored in the Nvram with the AT&Zn=x commandHost in either online or off-line command mode Echo enabled DTE ATI2Sn=x Numeric or verbose form CommandModem dials a telephone number touch tone dialing Numeric form Resets the modem and recalls user profile DisconnectingSubsequent commands to be ignored DCD or Rlsd signal Stored Profile AT&V0Active Profile Telephone Numbers Select profile S-register configurations into the Nvram user profile ‘n’Command to see the stored telephone number = 0-9 a B C D # * T P R W @ Command Default Indication Definition +EB Secondary channel operation, and vice versa CRC generation and checking disabledNrzi encoding and decoding disabled 12/V.34 +ESR +ETBM +IFC +GMR+GSN +ILRR=m = carrier,carrier,…carrier +MS command description+MA? will display a list of enabled alternative modulations If +MS = ,0,, no alternative modulations will be available BELL212 Carrier DescriptionBELL103 +MS=m See ‘m’ Value Description +PHSW=+PMHF +PMHR Enable Short Phase Conjunction with the +PSS commandEnable Short Phase 1 and Short Phase Disable short Phase 1 and Short Phase Mode Features Operating Modes Resulting +ES Connection Types 44/V.42/V.42 bis and MNP Data Modem Command Descriptions+ES Settings Answer Modem +ES=1, 0 +ES=4, 4 +ES=3, 0 +ES=3, 2 \Bn \Kn +DS=m +DR=mDirection Max string 3768 +EFCS=m +ER=m Display messages when +ER =Decimal value and the format is as follows +ER Lapm Non-error control operation Setting is ignored if origrqst=6Control during non-error control operation +ES=m Fax Identity Command Descriptions Fax Identity CommandsFax Class 1 Commands +FMFR?/+FMI Mod Selection Table Value Modulation Speed bps 30 Hdlc Frame Format Class 1 DTE-Generated Hdlc Frame Information AT+FTH=mod +FCLASS? Fax Mode Command Descriptions+FCLASS +FRH=m +FRS=m +FTH=m IS-101 Voice Mode AT Commands Dtmf Detection Reporting Voice Mode Command DescriptionsRelay Control +FLO=m Enable report Function +VDR=m See ‘m’ Event Description Defaults = ‘C’, BB860980, BFE63883, BB863EE0Caller ID report Command Reserved Distinctive ringing All +VEM=m See ‘m’ EX Value BIT Value Event EIGHT-DIGIT HEX Code B B 8 6 3 E EHEX Digit Location 128 Nominal transmit level Local telephone, or speaker+VIP Label Preassigned Voice I/O Labels+VLS=m Relay/Playback Control Voice I/O Primitive CodesPrimitive Code Description +VRX +VSD=m See ‘m’ +VSM=m +VSM=? command to obtain supported sampling rates141 AD3 3-bit Adaptive differential pulse code modulation Range 4800, 7200, 8000, and 11025 samples/second Hard Disk CmlSerial Compression 100 Factory default is ‘0’100 Default value 1 second Range 5-255 units of 0.01 seconds Specified by +VTD=m Dual tones may be sent using the following format+VTS=m None This sends a 500 ms period of silence Command Default Description Register Command Descriptions S10 Escape sequences Range Seconds Default 0 secondsS16 S25 S21S22 118 S30 Sleep mode is disabled by setting S33 to ‘0’ Modem exits sleep mode whenever the host reads or writes toModem or when a ring signal is detected Inactive state when Caller ID Tags for Formatted Reporting Tag Description Ring Uart Emulation in the Controllerless Modem Uart Emulation in Intelsdb.VxD THR UartRBR Parallel Host Interface Uart Register Bit Assignments Scratch Register SCR Uart Register DefinitionsModem Status Register MSR Line Status Register LSR Bit Framing errorOE Overrun Error-Not supported Stack Modem Control Register MCR IER Interrupt Enable registerProcedure is as follows Line Control Register LCR Fifo Control Register FCR Bit Interrupt Control Functions Interrupt Identity Register IIRID1 ID0 Transmitter Holding Register THR Interrupt Enable Register IERID bit 2 for Fifo mode Dlab = Programmable Data Rates Receiver Buffer Register RBRDivisor Latch Registers DLM and DLL Data Rate Divisor Number Divisor Latch Hex 16C550A Uart Fifo Operation Fifo Interrupt Mode OperationFifo Polled Mode Operation 102 536EX Chipset Developer’s Manual 103

Table 25. Voice Mode Command Descriptions (Continued)

Command

factory default is ‘0’.

100

Range: 5–255 (units of 0.01 seconds)

100*

Default value (1 second)

Intel Confidential

537EX specifications