Troubleshooting
Use this chart to solve common problems. If you fail to find the solution, contact your local dealer for assistance and service.
CONDITION | CAUSE | CORRECTION |
The power switch is | • Is the power cord | • Connect the power cord | ENGLISH | |
| ||||
“ON” but the machine | disconnected? | on power source. |
| |
does not operate. | • Is the fuse blown? | • Replace the blown fuse. |
| |
| • Is the TOP COVER | • Close the TOP COVER |
| |
| completely closed? | completely. |
| |
|
|
|
|
|
|
|
|
|
|
The power switch is | • Is the lamp installed | • Set the lamp securely. |
| |
“ON”, the fan is rotat- | securely? |
|
|
|
ing, but the lamp | • Is the lamp burned out? | • Replace the lamp. |
| |
does not come on. | • Is the LAMP CHANGE | • Move the LAMP CHANGER |
| |
| HANDLE in the right | HANDLE firmly to the right |
| |
| position? | (or left) position then turn |
| |
|
| the power switch “ON” |
| |
|
| again to reset the power. |
| |
|
|
|
|
|
The power switch is | • Is the PROJECTION | • Raise the PROJECTION |
| |
“ON” the lamp is on, | MIRROR open, and | MIRROR on the head and |
| |
but there is no pro- | properly tilted up? | tilt it to project image for- |
| |
jected image. |
| ward. |
| |
|
|
|
|
|
The image is blurred. | • Is the distance between | • Position the projector |
| |
| the screen and projection | 1.3 - 4 meters from the |
| |
| too far or too close? | screen. |
| |
| • Is the “UP” label on the | • Reinstall the Fresnel lens |
| |
| Fresnel lens facing the | with the “UP” label facing |
| |
| stage glass? | the stage glass making |
| |
|
| sure to secure it with the |
| |
|
| clip holders. |
| |
| • Is the projected image out | • Adjust the focus knob on |
| |
| of focus? | arm to have a good focus. |
| |
| • Is the transparency flat? | • Ensure that the trans- |
| |
|
| parency is flat. |
| |
|
|
|
|
|
The light is not bright | • Has the lamp been in use | • Replace the lamp. Or use |
| |
enough. | for a long time? | LAMP CHANGE HANDLE |
| |
|
| to switch to a new lamp. |
| |
|
|
|
|
|
Power is suddenly | • Is the fuse blown? | • Replace the fuse. |
| |
lost during use. | • Connection has been lost | • Check the main power |
| |
| with main power? | cable for right connection. |
| |
11KODAK EKTALITE E30/E31 OVERHEAD PROJECTORS
