 




93
®
Identities
This feature helps your VNC
viewer to confirm that a
revisited ServSwitch CX with IP is
genuine and not another device
masquerading as a ServSwitch CX
with IP. The list given will retain the
identities of all visited units (that
have full security enabled).
When you first make a secure
connection to the ServSwitch CX
with IP, the security information
for that ServSwitch CX with IP unit
is cached within this Identities tab
(i.e. the “identity” is known). The
next time that you connect to the
ServSwitch CX with IP, its identity is
checked against the stored version.
If a mismatch is found between the
current and the stored identities
then a warning will be issued to you.
If an existing ServSwitch CX with IP is fully reconfigured then it will need
to issued with a new identity. In this case the previous identity, listed in this
tab, should be removed so that a new identity can be created on the next
connection.
Load / Save
Configuration File - Reload
Allows you to load a configuration
file saved from this, or another
viewer.
Configuration File - Save
Allows you to save the current
settings so that they can be copied
from one viewer to another.
Configuration File - Save As...
Allows you to save the current
settings under a new name so that
they can be copied from one viewer
to another.
Defaults - Reload
When clicked, all connection
options are returned to the default
settings that are currently saved.
Defaults - Save
When clicked, saves the current connection options as the default set that will
be used in all subsequent VNC connections.