Black Box KV0424A-R2, KV1424A-R2, KV1416A-R2, KV0416A-R2 Modem Configuration, Reset Configuration

Modem Configuration

This page allows you to configure the		SERVSWITCH CX
COM1 serial port located at the rear of	Modem Config
the ServSwitch CX with IP.		Server IP	192.168.3.1
		Client IP	192.168.3.2
Server IP / Client IP		Baud Rate	115200
When a user dials into the ServSwitch		InitString	ATZS0=1
CX with IP via a modem or ISDN
adapter, the ServSwitch CX with IP sets		Initialize Port
up a temporary two-device network
		Restore Defaults
using PPP (Point to Point Protocol).
For this purpose, both devices must	Enter-Select		Esc-Exit
have ‘dummy’ IP addresses so that
they can communicate correctly. These		-Up -Down	Space-Toggle

two addresses can be almost anything

expressed in the quad octet format (i.e. 192.168.3.1.). However, it is advisable not to make them the same as the real IP addresses used by either the remote system or the ServSwitch CX.

Baud Rate

This option configures the speed of the serial connection between the ServSwitch CX with IP and a connected modem or ISDN terminal adapter. The default setting is 115200. The other communication settings are fixed as: No parity, 8 bit word, 1 stop bit.

Init String

The codes entered here are used to prepare the connected modem or ISDN terminal adapter for use with the ServSwitch CX with IP. The default code is a Hayes-compatible string to configure auto answer mode and would be understood by the vast majority of modem/ISDN devices. The code is sent when the ServSwitch CX with IP is first switched on or whenever the Initialize button is clicked.

Initialize Port

When selected, this option sends the characters entered in the ‘Init string’ field to the connected modem or ISDN terminal adapter.

Restore Defaults

When selected, this option resets the ‘Baud rate’ and ‘Init string’ values to their original default settings.

Reset Configuration

This option allows you to completely reset the IP portion of the ServSwitch CX with IP unit.

WARNING: This process will remove all network and modem/ISDN settings and return the unit to use its original state. A complete reconfiguration will be required before the IP features of the unit can be used.

To reset the ServSwitch CX with IP configuration

1With the Reset Configuration option highlighted, press .

2Access the Configure IP port option to view the initial IP configuration screens. See Initial IP configuration for details.

®

   



77