 




75
®
Configure IP port
Available only on ServSwitch CX with
IP models, the IP port configuration
menu allows you to determine
settings that relate directly to the
global (IP) user aspects of the unit:
Unit Configuration
IP admin password, encryption
settings, etc.
Network Configuration
IP address, net mask, VNC port,
etc.
Modem Configuration
Baud rate, initialisation string,
etc.
Reset Configuration
Completely resets the IP portion
of the ServSwitch CX with IP unit.

Unit Configuration

This page provides access to
a selection of both basic and
fundamental settings for the
ServSwitch CX with IP.
Keyboard
Use the arrow buttons to match the
keyboard layout expected by the host
system.
Admin Pwd
Enter the password that will be used
to gain administrator access to the
ServSwitch CX with IP. There can only
be one admin user and only that user
is given access to the configuration menus. The admin password background
will be red until a reasonably secure password has been entered, although this is
only advisory as any password or no password may be entered.
Unit Name
The name entered here will be displayed on the local menus and the remote
VNC/browser windows.
Time and Date
Use the left and right arrow keys to select the correct time and date. The time
entry uses the 24 hour clock notation. The internal real time clock will continue
to run for roughly one week without power to the unit, after that it will be lost
and require resetting. Use the up and down arrow keys to move between each
of the sections within the time and date entries.
Encryption
Three options are available: Always on, prefer off, prefer on. The one to choose
depends on the specific details of your installation - see Encryption settings for
details. The use of encryption imposes a slight performance overhead of roughly 10%
but is highly secure against third party intrusion.
To get here
1 From a local or remote (not accessible from a global keyboard), log on as
the ‘admin’ user.
2 Press (hotkeys can change).
3 Press to select ‘More menus’.
4 Select ‘Functions’.
5 Select ‘Configure IP port’.
SERVSWITCHCX
Configuration
UnitConfiguration
NetworkConfiguration
ModemConfiguration
ResetConfiguration
Back
Enter-Select
-Up -Down Esc-Exit
SERVSWITCHCX
UnitConfig
Hardware Rev1
Firmware 1.0b7
Keyboard UK
AdminPwd
UnitName AVCATx
Time 11: 14 : 44
Date 27 Apr 2006
Encryption PreferOff
Enter-Select
-Up -Down Esc-Exit
Space-Toggle