 




11
®
Global user (IP network port)
The ServSwitch CX with IP models
provide an autosensing Ethernet
IP port that can operate at 10 or
100Mbps, according to the network
speed. The ServSwitch CX with IP
models are designed to reside quite
easily at any part of your network:
• They can be placed within
the local network, behind any
firewall/router connections to the Internet, or
• They can be placed externally to the local network, on a separate sub-
network or with an open Internet connection.
Wherever in the network a ServSwitch CX with IP is situated, you will need to
determine certain configuration issues such as address allocation and/or firewall
adjustment to allow correct operation. Please refer to Networking issues within
the Configuration chapter for more details.
IMPORTANT: When a ServSwitch CX with IP is accessible from the public Internet
or dial up connection, you must ensure that sufficient security measures are
employed.
IP network link
To connect the Global user (IP network) port
1 Depending upon where in the network the ServSwitch CX with IP is being
connected, run a category 5, 5e or 6 link cable from the appropriate hub or
router to the ServSwitch CX with IP unit.
2 Connect the plug of the link cable into the IP port on the front panel of the
ServSwitch CX with IP unit.
3 Configure the network settings as appropriate to the position of the
ServSwitch CX with IP within the network - see Networking issues for
details.
POWER
SWITCH
SERVER
SYSTEM
SAM
LOCAL
USER REMOTE
USER
CX R
MODEM
/ISDN
POWER
IN
GLOBAL
USER
IP
®
724-746-5500
®