Frequently asked questions
With the aid of the following guide, minor problems can be fixed without a service call.
What if ... | Possible fault | Fix |
the dishwasher does not | The door is not properly | Close the door firmly. |
start? | closed. |
|
| The machine is not | Insert the plug. |
| plugged in. |
|
| The fuse is defective or | Reset the circuit breaker. |
| the breaker has tripped. | Make sure it is a 15 A |
|
| circuit breaker. |
| The dishwasher is not | Press "On", select |
| turned on. | program. |
| No program is selected. | Select a program with the |
|
| program selection |
|
| buttons. |
the dishwasher stops | The fuse is defective or | Reset the circuit breaker. |
during a program? | the breaker has tripped. | Make sure it is a 15 A |
|
| circuit breaker. |
the dishwasher stops | Water intake error. | – Turn off the dishwasher. |
running, shortly after | The "Intake / Drain" | – Open the water valve. |
starting a program and | indicator flashes / lights. | – Clean the water inlet |
the optic indicator |
| |
| filter, see maintenance | |
flashes? |
| |
| instructions. | |
|
| |
|
| The waterproof system |
|
| has activated. |
|
| – Call the Miele Technical |
|
| Service Department. |
after starting a program, | The optic indicator | Install the optic indicator |
the optic indicator does | reflector was not placed in | reflector correctly. |
not shine? | the steam deflector | See Installation manual, |
| properly. | "1. Install the steam |
|
| deflector". |
37
