CHANGING THE FILTER

Locating the Filters

Your refrigerator is equipped with water filtering system. The water filter system filters all dispensed drinking water, as well as the water used to produce ice.

Water Filter

The water filter is located at the top right side of the fresh food compartment.

Replacing the Water Filter

In general, you should change the water filter every six months to ensure the highest possible water quality. Water Filter Status on the user interface prompts you to replace the filter after a standard amount of water (200 gallons/757 liters for PureSource UltraTM) has flowed through the system.

If your refrigerator has not been used for a period of time (during moving for example), change the filter before reinstalling the refrigerator.

Filter Cartridge

Ordering Replacement Filters

To order your replacement filters, please visit our online store at www.frigidaire.com/store, by calling toll-free at 877-808-4195, or by visiting the dealer where you purchased your refrigerator. Frigidaire recommends that you order extra filters when you first install your refrigerator, and that you replace your filters at least once every six months.

Here is the product number to request when ordering:

PureSource UltraTM Water Filter

Part #ULTRAWF

NOTE

When ordering your replacement filter, please reorder the same filter type that is currently in your refrigerator.

More about your Advanced Water Filter

The PureSource UltraTM ice and water filter system is tested and certified to NSF/ANSI Standards 42 and 53 for the reduction of claims specified on the performance data sheet.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

Test & certification results:

Rated Capacity - 200 gallons/757 liters for

PureSource UltraTM ice and water filter

Rated service flow - .50 gallons per minute

Operating Temp: Min. 33° F, Max. 100° F

Maximum Rated Pressure - 100 pounds per square inch

Recommended Minimum Operating

Pressure: 30 pounds per square inch

To replace your PureSource UltraTM water filter:

It is not necessary to turn the water supply off to change the filter. Be ready to wipe up any small amounts of water released during the filter replacement.

1 Turn Off the ice maker power switch.

2Remove the filter by pushing on the end/face of the filter.

3Slide the old water filter cartridge straight out of the housing and discard it.

4Unpackage the new filter cartridge. Using the alignment guide, slide it gently into the filter housing until it stops against the snap-in connector at the back of the housing.

5Push firmly until the cartridge snaps into place (you should hear a click as the cartridge engages the snap-in connector).

6Press a drinking glass against the water dispenser while checking for any leaks at the filter housing. Any spurts and sputters that occur as the system purges air out of the dispenser system are normal.

7After filling one glass of water, continue flushing the system for about four minutes.

8Turn On the ice maker.

9Press and hold the Water Filter button on the Ice & Water Dispenser control panel for three seconds. When the display changes from Red to Green, the status has been reset.

30

Page 30
Image 30
Frigidaire DGHF2360PF important safety instructions Changing the Filter

DGHF2360PF specifications

The Frigidaire DGHF2360PF is a standout refrigerator that blends functionality and modern design, making it an ideal choice for contemporary kitchens. With its sleek stainless steel exterior and French door configuration, this model not only offers generous storage but also enhances the aesthetic appeal of your culinary space.

One of the main features of the DGHF2360PF is its spacious interior, providing an impressive total capacity that efficiently accommodates a variety of groceries and meal preparations. The interior is thoughtfully designed with adjustable shelves and clear bins, allowing users to customize the space according to their needs. The included humidity-controlled crisper drawers keep fruits and vegetables fresh for longer, while the door bins offer added convenience for frequently accessed items.

The refrigerator is also equipped with advanced cooling technologies that ensure optimal temperature control. The Frost-Free feature prevents ice buildup, eliminating the need for manual defrosting. The dual evaporator system maintains separate temperature zones for the refrigerator and freezer compartments, ensuring the freshness of food items while providing efficient cooling. Furthermore, the Efficient LED lighting illuminates the interior, making it easy to find ingredients even in low light conditions.

Another standout technology in the DGHF2360PF is the stainless steel finish, which not only offers a modern look but is also resistant to fingerprints, making it easier to maintain a clean appearance. The electronic controls with digital display allow for precise temperature adjustments and monitoring, enhancing user convenience and food safety.

Energy efficiency is a key characteristic of the Frigidaire DGHF2360PF, as it is designed to meet Energy Star guidelines, helping homeowners save on energy costs while reducing their carbon footprint. Additionally, the refrigerator operates quietly, contributing to a peaceful kitchen environment.

In conclusion, the Frigidaire DGHF2360PF combines style, space, and efficiency, making it a top choice for those seeking a reliable refrigerator that meets the demands of modern living. Whether you’re storing everyday groceries or preparing for a family gathering, this refrigerator offers the features and technologies needed to keep your food fresh and organized.