To level the doors using the adjustable lower hinge (select models):
1Remove all food items from door bins on door being adjusted.
2Open doors to 90 degrees.
3Loosen or remove screw.
Loosen or Remove
Screw
Open
Door
90
Degrees
Bottom of Door
Loosen/Remove Screw (where applicable)
NOTE
Adjustable hinge should only be used after doors have been leveled with rollers.
4Lift the door while adjusting the washer. To raise the door, rotate washer clockwise (when viewed from the bottom). To lower door, rotate washer
Lower
Door
HingeRaise
WasherDoor
Raising/Lowering Door
INSTALLATION
To adjust the flipper mullion:
1Loosen the screw located on the flipper mullion hinge.
Flipper
Mullion
Screw
Flipper
Mullion
Hinge
Adjusting Flipper Mullion Screw
2Adjust flipper mullion height. For proper connection with the flipper mullion guide, there should be a separation about the thickness of a coin (0.060 inches, or
1.5 mm) between the guide and flipper mullion.
Mullion
Guide
Flipper
Mullion
Thickness
of a Coin
Adjusting Flipper Mullion Height
3
9