Frigidaire DGHF2360PF Installing Door Handles, Door Handle Mounting Instructions for Frigidaire

Models: DGHF2360PF

1 40
Download 40 pages 247 b
Page 13
Image 13
INSTALLING DOOR HANDLES

INSTALLING DOOR HANDLES

Door Handle Mounting Instructions for Frigidaire

1Remove handles from carton and any other protective packaging.

2Position fresh food handle end caps over upper and lower pre-installed shoulder bolts (A) that are fastened into door, ensuring the holes for the set screws are facing towards the opposite door.

3While holding handle firmly against door, fasten upper and lower Allen set screws

(B) with supplied Allen wrench.

4Repeat steps 2 and 3 to install opposite handle. Ensure the holes for the set screws are facing towards the first door.

5Position freezer handle end caps over left and right pre-installed shoulder bolts that are fastened to the door, ensuring the holes for the set screws are facing down.

6While holding handle firmly against door, loosely tighten right Allen set screw (B) with supplied Allen wrench until there is no gap between handle and door.

7Still holding the handle firmly to the door, firmly tighten left Allen set screw (B) with supplied Allen wrench.

8Return to the right Allen set screw (B) and firmly tighten with supplied Allen wrench.

Mounting Refrigerator Handles

Mounting Freezer Handle

NOTE

All set screws should be tightened so the screw is below the surface of the handle. The handles should be drawn tight to freezer and refrigerator doors with no gaps.

Opening the opposite door while tightening the Allen screw makes installation easier.

The door handle may loosen over time or if it was installed improperly. If this happens, tighten the set screws on the handles.

Door Handle Mounting Instructions for FrigidaireManual background CAUTION

Wear gloves and safety goggles. Use extreme CAUTION when installing these handles.

13

Page 13
Image 13
Frigidaire DGHF2360PF Installing Door Handles, Door Handle Mounting Instructions for Frigidaire, Note