CONNECTING THE WATER SUPPLY

To Connect Water Supply Line To Ice Maker Inlet Valve

1Disconnect refrigerator from electric power source.

2Place end of water supply line into sink or bucket. Turn ON water supply and flush supply line until water is clear. Turn OFF water supply at shutoff valve.

3Remove plastic cap from water valve inlet and discard cap.

4If you use copper tubing - Slide brass compression nut, then ferrule (sleeve) onto water supply line. Push water supply line into water valve inlet as far as it will go (¼ inch/6.4 mm). Slide ferrule

(sleeve) into valve inlet and finger tighten compression nut onto valve. Tighten another half turn with a wrench; DO NOT over tighten. See Figure 1.

If you use stainless steel tubing - The nut and ferrule are already assembled on the tubing. Slide compression nut onto valve inlet and finger tighten compression nut onto valve. Tighten another half turn with a wrench; DO NOT over tighten. See Figure 1.

5With steel clamp and screw, secure water supply line (copper tubing only) to rear panel of refrigerator as shown.

6Coil excess water supply line (copper tubing only), about 2½ turns, behind refrigerator as shown and arrange coils so they do not vibrate or wear against any other surface. Do not kink tubing.

7Turn ON water supply at shutoff valve and tighten any connections that leak.

8Reconnect refrigerator to electrical power source.

9To turn ice maker on, lower wire signal arm (freezer ice maker) or set the ice maker’s On/Off power switch to the “On” position (fresh food ice maker).

Plastic Water Tubing

Steel

to Ice Maker

Clamp

Fill Tube

Brass

 

 

Compression

 

Nut

 

Ferrule

 

(Sleeve)

 

Water Line

 

Water Valve

 

Bracket

 

Valve Inlet

 

Water Valve

Water line from household water supply

(Include enough tubing in loop to allow moving refrigerator out for cleaning.)

Figure 1

IMPORTANT

After connecting the water supply, refer to “How to Prime the Water Supply System” for important information about priming an empty water supply system.

Your refrigerator’s water supply system includes several tubing lines, a water filter, a water valve, and a water tank. To ensure that your water dispenser works properly, this system must be completely filled with water when your refrigerator is first connected to the household water supply line.

17

Page 16 Page 18
Page 17
Image 17
Frigidaire DGHF2360PF important safety instructions To Connect Water Supply Line To Ice Maker Inlet Valve, Valve Inlet
Page 16 Page 18

DGHF2360PF specifications

The Frigidaire DGHF2360PF is a standout refrigerator that blends functionality and modern design, making it an ideal choice for contemporary kitchens. With its sleek stainless steel exterior and French door configuration, this model not only offers generous storage but also enhances the aesthetic appeal of your culinary space.

One of the main features of the DGHF2360PF is its spacious interior, providing an impressive total capacity that efficiently accommodates a variety of groceries and meal preparations. The interior is thoughtfully designed with adjustable shelves and clear bins, allowing users to customize the space according to their needs. The included humidity-controlled crisper drawers keep fruits and vegetables fresh for longer, while the door bins offer added convenience for frequently accessed items.

The refrigerator is also equipped with advanced cooling technologies that ensure optimal temperature control. The Frost-Free feature prevents ice buildup, eliminating the need for manual defrosting. The dual evaporator system maintains separate temperature zones for the refrigerator and freezer compartments, ensuring the freshness of food items while providing efficient cooling. Furthermore, the Efficient LED lighting illuminates the interior, making it easy to find ingredients even in low light conditions.

Another standout technology in the DGHF2360PF is the stainless steel finish, which not only offers a modern look but is also resistant to fingerprints, making it easier to maintain a clean appearance. The electronic controls with digital display allow for precise temperature adjustments and monitoring, enhancing user convenience and food safety.

Energy efficiency is a key characteristic of the Frigidaire DGHF2360PF, as it is designed to meet Energy Star guidelines, helping homeowners save on energy costs while reducing their carbon footprint. Additionally, the refrigerator operates quietly, contributing to a peaceful kitchen environment.

In conclusion, the Frigidaire DGHF2360PF combines style, space, and efficiency, making it a top choice for those seeking a reliable refrigerator that meets the demands of modern living. Whether you’re storing everyday groceries or preparing for a family gathering, this refrigerator offers the features and technologies needed to keep your food fresh and organized.
Top Page Image Contents