MEMO

Try Recording Your Performance

You can use the following methods to save the recorded performance on the external devices. - Connect an audio device to the ep-90/70, and record your performance on a cassette tape or

other media (p. 24).

- Connect a MIDI sequencer, and record the performance on the sequencer (p. 25).

Listening to the Recorded Performance

Listen to the performance you recorded.

1. Press the [Play] button to make the indicator light.

fig.6-08.e

2.

fig.6-07.e

MEMO

The performance you recorded will play back. When the recorded performance ends, the [Play] button indicator will go dark, and playback will stop.

PlayPlay

Press

Lit

If you wish to stop playback during the performance, press the [Play] button to make the indicator go dark.

PlayPlay

Press

Dark

If the metronome is sounding while the performance plays back, the playback will begin after a two-measure count.

Deleting Recorded Songs

You can delete recorded songs in their entirety.

1. While pressing the [Play] button, also press the [Rec] button.

This deletes the recorded song.

fig.6-10.e

Play Rec

While holding down...

Press

21

Page 21
Image 21
Roland ep-90/70 owner manual Listening to the Recorded Performance, Deleting Recorded Songs